Chameleon Automotive Car Window Film Tint (1M wide and x1.5M long) Blue/Green Shades 55% VLT. This tint can be applied to any car windows (Front windshield; Side windows; Back windshield).
The tint film from inside the car can give a slight shade depending on the colour of the tint- it is not 100% clear and transparent, although it does not obstruct the vision. I you receive a damaged packaging please do not accept it!
Do not attempt to intentionally damage the film. Prepare the windows for the tint to be applied. Use a soapy solution (tap water with soapy solution diluted) to clean the outside of the windows. This will ensure that there are no contaminants and these won't damage the film. Lay the piece of tint over the outside of the window and heat- shrink it to the shape of the glass.
Ensure that the liner is always facing you. Please note that any curved glass will need to be heat-shrunk using a heat gun. Prepare and clean the inside of the glass.This can be done using the same slip solution and pad. You can clean the inside of the glass few times- this will ensure the glass is clean and spec-free before installation. Peal the liner off the tint and apply slip solution on to the film and glass and lay the film onto a glass. Firmly squeegee the water out. Well done- the job is done! Once the installation is completed do not roll windows up or down for 3 days and do not switch the rear window heaters. You can do both after 3 days once the glue and water had evaporated!
You might need some tools to do the installation yourself. We are well-established business with over 7 years of experience. As a UK's leading supplier and vehicle decal producer we ensure that we source the premium quality product and provide the best customer service. Our team are high level professionals ready to provide you with an advice on purchasing window tints, pre-cut products and installation queries.